REXUS Power Punch

If you hammer enough roll pins into AR15 bolts and gas blocks and such, odds are you'll meet enough stubborn pins that you'll start bending your punches and it's $6.99 here, $9.95 there, to get a new one — if they don't force you to buy the whole set and now you've got extra sizes you don't need.

Our REXUS Power Punch is the answer. After you get a roll pin started, use our tough Power Punch (for both 1/16 and 5/64 roll pins) to do the hard work of seating the pin flush without worrying about bending your expensive seater punches. If you want, you can countersink the pin just below the surface with your seater punch to finish it — but since 99% of the work has been done you won't waste money ruining delicate punches.

• Length: 3.125 inches
• Tip diameter is .090" with a pilot nub sized for 1/16 (.0625) and 5/64 (.078) slotted-spring roll pins
• Weight: 1.0 ounces / 28 grams